Ultrasonic Fuel Level Sensor for Nontouch Installation, Easily Installation, High Resolution Sensor for Truck and Car
Principle:Fuel Level Sensor
Kind:Liquid Level Transmitter
Structure:All in One
Sensor for Car/Truck Tank Level Measurin:Oil Tank Sensor for GPS System
Trademark:ultrasonic fuel level sensor
With non-contact measurement ultrasonic transducer technology, widely used in detecting displacement, thickness, distance, fuel level, material level, and transparency, suitable for measuring of liquid level, gaseous media and volume.
1.Output signal value,measuring range,baud rate,program execution algorithmic are adjustable.
2.Easy install,install outside of tank,have no damage to tank.
2.Thick ultrasonic probe,can measuring tank thickness as far as 7mm.
3.Measuring result will not influenced by the tank material(like plastic,stainless steel,etc)
4.Standard glue and metal wire to make the device permannent on tank
1.Technical data fuel level sensor
Maximum Load Current:3mA
Interface:One way analog output0.08~3.25V,RS232
ultrasonic probe protection Level
Master control box protection level
1)interface(Output level value)
²nterface: This device provides RS232 data port, analog output voltage
²RS232 serial port: The default is 9600 baud, level sensors in real time values for each measured pass 10S (in units of 0.1mm). The baud rate can be modified according to the user needs to be done, the time interval data transmission
²Voltage sampling port:The output voltage of the voltage output from the current level value and the size of the set range determined.